Wheel and Caliper Ceramic Coating

Advantages of Wheel and Caliper Ceramic Coating

• SCRATCH PROTECTION - Prevents Scratches and Pitting with 9H Hardness
• SUPER HYDROPHOBIC - Water and Oil Slide Right Off
• REPEL BRAKE DUST - Spend Less Time Cleaning
• LONG LASTING - Application Lasts Up To 5 Years
• EASY TO APPLY - Simply Clean, Apply With Included Applicator, and Buff

1. Before applying any Gold Label Detailing Coating, ensure that the vehicle is extremely clean, and is parked out of direct sunlight in a cool, dust-free environment. While not necessary, we also suggest polishing and/or clay barring the car before applying any coating for best results.
2. Shake the bottle and gently twist off the cap.
3. Take the included micro suede cloth and wrap it around the applicator sponge. You want the cloth to cover black part of the applicator, while allowing you to grab the blue portion.
4. Carefully apply the Coating down a straight line on the cloth. Just a few drops of product is all you need to start.
5. Evenly spread the product on the car focusing on a 2’x2’ section at a time. Use a cross-hatch pattern (side to side strokes, then up and down strokes) to make sure there is an even application of the product on the surface. If you see the product is no longer spreading you may apply more product to the applicator
6. Once you’re done with the section you’re working on, quickly wipe/buff the product using a soft, clean microfiber towel.
7. Proceed using this method until you’ve coated the entire surface you’re working on.
8. Once you’re done, make sure to avoid exposing the surface to any water or rain for AT LEAST 2 HOURS, and ideally let the vehicle sit for AT LEAST 24 HOURS.  For Best Results, go back and repeat for a second coat.